Amplificadores profesionales de 2 canales con DSP y Ethernet Interface

Amplificadores serie M




  • Optimized preset data for Pioneer loudspeakers (not pre-installed).
  • Includes DSP, 24-bit audio processing with 48kHz sampling.
  • Advanced switch-mode power supply technology for high performance and compact size
  • Compact 1U rack size.
  • Fully protected circuitry design with AC protection, clip limiter, DC protection, VHF protections, short circuit protection, thermal protection and long term limiter.
  • Temperature controlled continous variable speed fan, front to back airflow.
  • Includes Ethernet.
  • Control and monitoring through Armonía Pro Audio Suite™ software.

Especificaciones de M30DHDSP / M20DHDSP

Output Power
EIAJ test,
1 kHz,
1% THD
1,500W×2 1,200W×2
900W×2 600W×2
100V 1,500W×2  * N/A
70V 1,200W×2 ** 1,200W×2 **
8Ω Bridged 3,000W×1 2,400W×1
Operating voltage AC115V - 230V (factory selection), 50/60Hz
Consumption / current draw @230V @115V @230V @115V
  Idle 37W/0.3A 37W/0.6A 35W/0.3A 35W/0.6A
1/8 of max output power @4Ω 530W/3.54A 530W/7A 371W/2.54A 371W/5A
1/4 of max output power @4Ω 1,024W/6.52A 1,024W/13.04A 701W/4.5A 701W/9A
Dimensions (W×H×D) 483 x 44.5 x 379mm 483 x 44.5 x 379mm
Weight 7.3Kg (16 lb) 7.3Kg (16 lb)
Audio signal input connectors Analog : 2 x balanced Neutrik® XLR female Analog : 2 x balanced Neutrik® XLR female
Audio signal output connectors Analog : 2 x Neutrik® XLR male hard-wired to the corresponding input Analog : 2 x Neutrik® XLR male hard-wired to the corresponding input
Loudspeaker output connectors Neutrik® Speakon NL4MD x 2
GAIN , user selectable -∞,4dB, 14dB, 18dB, 20dB, 22dB, 24dB, 26dB, 28dB, 30dB, 32dB
Frequency response (1W@8Ω,±1dB) 20Hz - 20kHz
S/N ratio (20Hz - 20kHz, A weighted) 111dBA or more 113dBA or more
Crosstalk separation (@1kHz) 70dB or more 70dB or more
Slew rate (8Ω, Input filter bypassed) 40 V/μs
Damping factor @8Ω 5000 or more (@100Hz)
DSP presets Bank of 4 presets, management and upload via Armonía Pro Audio Suite™
  • * = DSP preset with high-pass filter required
  • ** = DSP preset with high-pass filter and output voltage limiter required